Sf6 Gas Density Monitor

When our SF6 gas density is connected to the closed system, the system equipment is filled with SF6 gas. When the SF6 gas density reaches the specified value, the pointer of the density controller points to the filling gas pressure.

Product Details

sf6 gas density monitor


sf6 gas density monitor Description:

When our SF6 gas density is connected to the closed system, the system equipment is filled with SF6 gas. When the SF6 gas density reaches the specified value, the pointer of the density controller points to the filling gas pressure. When the temperature of the working environment changes, although the density of SF6 gas does not change, the pressure of SF6 gas will change with the change of temperature, and the pointer on the density should be deflected with the change of pressure. The change of the SF6 gas pressure is compensated by the temperature compensation device inside the density so that the pointer does not deflect. Only when the SF6 gas leaks in the system, causing the density to drop, the pointer of the SF6 gas density is deflected to monitor the density of the SF6 gas in the closed container, and the gas density can be displayed on site, when the density value reaches the set value. Alarm for monitoring and control of high pressure systems. Prevent damage to the equipment when SF6 gas leaks, thus protecting the equipment and ensuring normal operation of the equipment.

11


Applications:

SF6 gas Insulation switchgear

SF6 gas Insulation Circuit Breaker

SF6 Gas Insulation Switch

SF6 gas Insulation transformer

SF6 gas Insulation Voltage transformer(Current transformer)

SF6 gas Insulation bus bar system

Special features:

Using imported temperature compensation components to make sure the high accuracy and the stable performance.

Using AISI304 stainless steel sealed case, which has beautiful appearance and high protection level.

The air circuit connection pipe system is made of AISI316 stainless steel.

Using plug-in junction box, convenient wiring, reliable and stable.

It adopts argon gas protection and laser welding to seal leak detection by helium mass spectrometry to ensure sealing performance.

Adopt gold-plated electric contact switch design to achieve accurate and stable SF6 gas density monitoring function.

Multiple interface connection methods are available, which can be matched with various self-sealing valves.

Three pairs of contacts are used, which can realize over-pressure alarm, double alarm or double-locking and other options, and the monitoring is safer and more reliable.

sf6 network monitor

Specifications

1 .Nominal size : 100mm

2.Scale range :-0.10.9MPa(customized) 

3.Accuracy:±1 % at ambient temperature +20 °C

                         ±2.5 % at ambient temperature -30 +60 °C

4.Ingress protection :IP65

5.Permissible temperature ranges Operating temperature: -20 … +60 °C (gas phase) Storage temperature: -50 … +60 °C

6. leak rate 1X10-9Pa.m3/s

7.Connection Size:M20*1.5(customized)

8.Connection:lower or back

9.Electrical connection: plug-in connection M20*1.5 sealing head, cable size: 1.5mm2 recommended, large 2.5mm2

10.Insulation performance: insulation resistance >100MΩ (DC500V), power frequency withstand voltage: 2KV, 50/60Hz 1min

11.Material of the contacts:  80 % Ag / 20 % Ni, 10 mm gold-plated

12.Impact rating: 300m/s2

13.Switching power:  30W/50VA1Amax),220VDC/380V  50/60Hzmax

14.Window cover:Safety glass

15.Pressure part:imported Bourdon tube

16.Resistant to working environment vibration: V·H·5




 



Inquiry